|
IEQ-1 Note 1: Ventilation Rates
Product is likely to assist in a project obtaining credits as it increases outside air ventialtion volumes and/or rates, facilitating healthy indoor environments. Credit points are acheived when either nattural ventialtion is provided to 95% of the nominated area, when Mechanically Air-conditioned and Mechanically Assisted Naturally Ventialted Spaces provide a rate of the minimum outside air a percentage greater than the requirements of AS 1668.2-1991 for 95% of the nominated area or when Mixe Moded Ventialted spaces meet the criteria above.
The manufacturer/supplier offers a prodcut which contributes to the acheivement of credit points in combination with other products in compliance with Ventilation criteria.
|
Points Available
3
|
|
IEQ-2 Note 1: Air Change Effectiveness
Product is likely to assist in a project obtaining credit points as it mets Air Change Effectiveness (ACE) crieteria for 95% of occupied areas for either Naturally Ventilated Spaces, Mechanically Air-Conditioned and Mechanically Assisted Naturally Ventilated aspaces and Mixed-Mode Ventialted Spaces in accordance with prescribed requirements.
The manufacturer/supplier offers a prodcut which contributes to the acheivement of credit points in combination with other products in compliance with ACE criteria.
|
Points Available
2
|
|
IEQ-3 Note 1: CO2 Monitoring & Control & VOC Monitoring
Product is likely to assit in a project obtainign credit point as it assists in the monitoring of Carbon Dioxide and VOC's. Credit point is achieved when a monitoring system is installed and where either 95% of the nominated area is Naturally Ventilated, Mechanically Air-Conditioned and Mechanically Assisted Naturally Ventilated Spaces that have CO2 monitoring systems or no circulated components or Mixed-Mode Ventialted Spaces meet the criteria above in accordance with prescribed requirements.
The manufacturer/supplier offers a prodcut which contributes to the acheivement of credit points in combination with other products in compliance with Co2 Monitoring and Control and VOC Monitoring criteria.
|
Points Available
1
|
IEQ-4: Daylight
Product is likely to assist in a project obtaining credits by contributing, when appropriately designed in combination with other materials/elements to a Daylight Factor (DF) of greater than 2.0% at desk height level, accordance with prescribed requirements. Credit points achieved are determined by the percentage (30%, 60% and 90%) of the nominated area with the above defined DF.
An additional point is available for primary and secondary schools where DFof 2% is achieved for 90% of the nomianted area, and 50% of the learning space has a DF of greater than 4% for 95% of the learning space at desk height under a uniform design sky.
|
Points Available
4
|
|
IEQ-4 Note 1: Daylight
Product is likely to assist in a project obtaining credits by contributing, when appropriately designed in combination with other materials/elements, to a finished internal reflectivity level greater than average, hence contributing to a Daylight Factor (DF) of 2% at desk height level unde a uniform sky. Credit points achieved are determined by the percentage of nominated area above the defined Daylight Factor.
An additional point is available for primary and secondary schools where DFof 2% is achieved for 90% of the nomianted area, and 50% of the learning space has a DF of greater than 4% for 95% of the learning space at desk height under a uniform design sky.
The manufacturer/supplier offers a prodcut which contributes to the acheivement of credit points in combination with other products in compliance with Daylight criteria.
|
Points Available
4
|
|
IEQ-5 Note 1: Thermal Comfort
Product is likely to assist in a project obtaining credits by facilitation Naturally Ventilated Spaces and Mechanically Assisted Naturally Ventilated Spaces, Mechanically Assisted Naturally Ventilated Spaces, Mechanically Air-Conditioned Spaces and Mixed-Mode Ventialted Spaces in providing individual thermal comfort in accordance with prescribed requirements.
The manufacturer/supplier offers a prodcut which contributes to the acheivement of credit points in combination with other products in compliance with Thermal Comfort criteria.
|
Points Available
3
|
|
IEQ-6: Hazardous Materials
To obtain this credit the project must implement a comprehensive hazardous materials survey and remove asbestos, Lead or Polychlorinated Biphenyls (PCBs) in accordance with the prescribed standards.
|
Points Available
1
|
|
IEQ-6 Note 1: Hazardous Materials
To obtain this credit the project must implement a comprehensive hazardous materials survey and remove asbestos, Lead or Polychlorinated Biphenyls (PCBs) in accordance with the prescribed standards.
Product may contribute towards the safe removal of hazardous materials in accordance with the prescribed standards.
|
Points Available
1
|
|
IEQ-7: Internal Noise Levels
Product is likely to assist in a project obtaining this credit by improving ambient noise levels in accordance with AS/NZS2107:2000 for the building services design and the overall building.
|
Points Available
2
|
|
IEQ-7 Note 1: Internal Noise Levels
Product is likely to assist in a project obtaining this credit by directly reducing internal noise levels of Building Services Design or Overall Building. One Credit point is achieved where the Building Services Design meets the prescribed standards. One point is also achieved where the nominated design sound levels for each functional space are provided in accordance with the lower value in the prescribed standards.
Product may contribute as an individual component, in combination with other suitable components, in achieving an Internal Noise Level that complies, in whole or in part, with the prescribed requirements.
|
Points Available
2
|
|
IEQ-8: Volatile Organic Compounds: Paints
Product is likely to assist in a project obtaining a credit point as it meets the prescribed Volatile Organic Compound (VOC) emission standard for paints. To achieve the credit point 95% of all paints in the project must be in accordance with the prescribed standard.
|
Points Available
1
|
|
IEQ-8 Note 1: Volatile Organic Compounds: Paints
Product is likely to assist in a project obtaining a credit point as it meets the prescribed Volatile Organic Compound (VOC) content standard for paints. To achieve the credit point 95% of all painted surfaces in the project must be in accordance with the prescribed standard.
Product may eliminate the need for painted surfaces and assist a project in obtaining maximum IEQ-8 credits (paints) for using no paints.
|
Points Available
1
|
|
IEQ-8: Volatile Organic Compounds: Carpets and other Floor Finishes
Product is likely to assist in a project obtaining a credit point as it meets the prescribed Volatile Organic Compound (VOC) emission standard for carpets and other floor finishes. To achieve the credit point 95% of all carpets and other floor finishes in the project must be in accordance with the prescribed standard.
|
Points Available
1
|
|
IEQ-8 Note 1: Volatile Organic Compounds: Carpets and other Floor Finishes
Product is likely to assist in a project obtaining a credit point as it meets the prescribed Volatile Organic Compound (VOC) emission standard for carpets and other floor finishes. To achieve the credit point 95% of all carpets and other floor finishes in the project must be in accordance with the prescribed standard.
Product may offer an alternative to carpet and meet the VOC emission standards providing an alternative Low VOC flooring option, in accordance with the prescribed standard above.
|
Points Available
1
|
|
IEQ-8: Volatile Organic Compounds: Adhesives and Sealants
Product is likely to assist in a project obtaining a credit point as it meets the prescribed Volatile Organic Compound (VOC) emission standard for adhesives and sealants. To achieve the credit point 95% of all adhesives and sealants used in the project must be in accordance with the prescribed standard.
|
Points Available
1
|
|
IEQ-8 Note 1: Volatile Organic Compounds: Adhesives and Sealants
Product is likely to assist in a project obtaining a credit point as it meets the prescribed Volatile Organic Compound (VOC) emission standard for adhesives and sealants. To achieve the credit point 95% of all adhesives and sealants used in the project must be in accordance with the prescribed standards.
Product may eliminate the need for adhesives/sealants and assist a project in obtaining maximum IEQ-8 credits (adhesives & sealants) for using no adhesives/sealants.
|
Points Available
1
|
|
IEQ-8: Volatile Organic Compounds: Tenancy Fitout Items
Product is likely to assist in a project obtaining a credit point as it meets the prescribed Volatile Organic Compound (VOC) emission standard for Tenancy Fitout Items (workstations, walls/partitions, chairs, tables and storage units). To achieve the credit point 95% of Tenancy Fitout Items used in the project must be in accordance with the prescribed standards.
|
Points Available
1
|
|
IEQ-8 Note 1: Volatile Organic Compounds: Tenancy Fitout Items
Product is likely to assist in a project obtaining a credit point as it meets the prescribed Volatile Organic Compound (VOC) emission standard for Tenancy Fitout Items (workstations, walls/partitions, chairs, tables and storage units). To achieve the credit point 95% of Tenancy Fitout Items used in the project must be in accordance with the prescribed standards.
Product is likely to assist as an individual component, in combination with other suitable components, in achieving a Tenancy Fitout Item which complies with the prescribed standard.
|
Points Available
1
|
|
IEQ-9: Formaldehyde Minimisation
Product is likely to assist in a project obtaining credits as it meets the prescribed standards for formaldehyde emissions for engineered wood products (including exposed and concealed applications). Products with no added formaldehyde or formaldehyde emissions of less than or equal to E1 are compliant with this credit. To achieve the credit point all engineered wood products used in the project must be in accordance with these requirements.
|
Points Available
1
|
|
IEQ-9 Note-1: Formaldehyde Minimisation
Product is likely to assist in a project obtaining credits as it meets the prescribed standards for formaldehyde emissions for engineered wood products (including exposed and concealed applications). Products with no formaldehyde or formaldehyde emissions of less than or equal to E1 are compliant with this credit. To achieve credit points all engineered wood products used in the project must be in accordance with these requirements.
This product may offer an alternative to composite wood products and assist a project in obtaining maximum IEQ-9 credits for using no composite wood products.
|
Points Available
1
|
|
IEQ-11: Daylight Glare Control
Product is likely to assist in a project obtaining this credit as it meets the prescribed glare control requirements for the nominated area through use of fixed shading devices or blinds and screens with a Visual Light Transmittance (VLT) of less than 10% in accordance with prescribed requirements.
|
Points Available
1
|
|
IEQ-11 Note-1: Daylight Glare Control
Product is likely to assist in a project obtaining this credit as it meets the prescribed glare control requirements for the nominated area through use of fixed shading devices or blinds and screens with a Visual Light Transmittance (VLT) of less than 10% in accordance with prescribed requirements.
Product may contribute as an individual component, in combination with other suitable components, in achieving a Daylight Glare Control that complies, in whole or in part, with the prescribed requirements.
|
Points Available
1
|
|
IEQ-13: Electric Lighting Levels
Product is likely to assist in the achievement of credit points as it contributes towards lighting that is not over designed. Credit point is achieved when 95% of the nominated area facilitate lighting design that provides maintenance illuminance of not greater than 25% above minimum levels recommended in table E1 of AS1680.2.3, in accordance with prescribed requirements.
|
Points Available
1
|
|
IEQ-13 Note 1: Electric Lighting Levels
Product is likely to assist in the achievement of credit points as it contributes towards lighting that is not over designed. Credit point is achieved when 95% of the nominated area facilitate lighting design that provides maintenance illuminance of not greater than 25% above minimum levels recommended in table E1 of AS1680.2.3, in accordance with prescribed requirements.
Product may contribute individually or in combination with other product in contributing towards lighting levels prescribed above.
|
Points Available
1
|
|
IEQ-14: External Views
Product is likely to assist in a project obtaining credits by providing occupants with a visual connection to the external environment. Credit point is achieved when the nominated area has a direct line of sight to outdoors or to an adequately sized and naturally lit internal atrium in accordance with the prescribed requirements.
|
Points Available
1
|
|
IEQ-14 Note 1: External Views
Product is likely to assist in a project obtaining credits by providing occupants with a visual connection to the external environment. Credit point is achieved when the nominated area has a direct line of sight to outdoors or to an adequately sized and naturally lit internal atrium in accordance with the prescribed requirements.
Product may contribute as an individual component, in combination with other suitable components, in facilitating External Views, in whole or in part, with the prescribed requirements.
|
Points Available
1
|
